Can a Teltonika charger be connected to a platform other than the manufacturer's?

Yes. The TeltoCharge (all variants) models speak standard OCPP and let you change the server URL. In the Teltonika Energy app, paired with the charger over Bluetooth: Settings → OCPP.

Which OCPP URL do I enter on a Teltonika for askacharge.com?

wss://askacharge.com/askacharge/ocpp/your-brand, where your-brand is the brand identifier on askacharge.com; the charger appends its identity. The identity must match the one registered in the panel and the password stays blank unless the charger's OCPP credential has been enabled.

Do I lose the manufacturer's app when I set OCPP on a Teltonika?

Some app functions move to the OCPP platform (start, cards, statistics). The hardware stays the same and you can go back by changing the URL again.

How to change the OCPP server URL on a Teltonika charger (TeltoCharge (all variants)) and connect it to another platform

A Teltonika charger that speaks standard OCPP can be connected to any platform by changing one setting. Here is where that setting lives on TeltoCharge (all variants), exactly what to enter, and where people usually get stuck. Written by a platform (askacharge.com), but the procedure works for any.

Where the setting lives

In the Teltonika Energy app, paired with the charger over Bluetooth: Settings → OCPP.

Step by step

Open the app, Add new device, pick your TeltoCharge and pair with the last 6 digits of the security code (label).
Give it internet: Wi-Fi, Ethernet or SIM (with your carrier's APN). Update the firmware from the app.
Settings → OCPP: in Server URL your brand's base URL ending in a slash (…/ocpp/your-brand/); in Charge point identity the serial number (or whatever you register).
Switch OCPP on, Save and restart the charger. Within a minute it shows as connected on the same screen.

What to enter to connect it to askacharge.com

OCPP server URL	`wss://askacharge.com/askacharge/ocpp/your-brand` — your-brand is your brand's identifier on askacharge.com (shown under Chargers → Add, with the full URL ready to copy). The charger appends its own identity; if your unit only has a URL field and no identity field, enter the full URL: `…/ocpp/your-brand/identity`.
Charge point identity	The same one you register in the panel when adding the charger. Case-sensitive. With Teltonika, the serial number is the easiest choice.
Password	Blank by default. If you enable the charger's OCPP credential in the panel (recommended for units exposed to the internet), the username is the identity and the password is the one the panel generates: OCPP Security Profile 2.
Protocol	OCPP 1.6J (JSON) or OCPP 2.0.1. Subprotocol `ocpp1.6` / `ocpp2.0.1`.
Before connecting	The charger must be registered in the brand with that identity; otherwise the server rejects the connection. Register under Chargers → Add.

Where it usually fails

The URL must end in /; without the slash it does not connect (Teltonika's own FAQ says so).
wss:// is supported from firmware 1.4 (November 2022); on anything older, update first.
With OCPP on, the app hides some settings (the ones the platform now controls). That is normal.

If your brand isn't here

The procedure is always the same; what changes is where the setting lives: look in the manufacturer's app, in the charger's web interface (by its IP) or in the installer software for a section called OCPP, Back office, Central System or Server. You need to be able to enter the URL and, nearly always, the identity. If the field is locked or missing, the manufacturer has tied the charger to its own platform: read what to do when the manufacturer locks or switches off its server.

Other brands

WallboxPulsar Plus, Pulsar Max, Pulsar Pro, Commander 2, Copper SB AlfenEve Single S-line, Eve Single Pro-line, Eve Double Pro-line, Twin AutelMaxiCharger AC Lite, AC Wallbox, AC Elite, AC Ultra Grizzl-EGrizzl-E Smart, Grizzl-E Smart v2 (North America)V2CTrydan, Trydan Pro CircontroleNext Elite, eNext Park, Raption, Wallbox eHome (with communications module)ZaptecGo, Go 2, Pro EaseeHome, Charge, Charge Core, Charge Lite, One KEBAKeContact P30 x-series (and c-series as clients), P40 ABBTerra AC (W7, W11, W22)Schneider ElectricEVlink Pro AC, EVlink Smart Wallbox, EVlink Parking IngeteamINGEREV Fusion Wallbox, Fusion Street, Rapid OrbisViaris Uni, Viaris Combi+, Viaris City WebastoUnite, Unite MID, Next, Pure OpenEVSEOpenEVSE, EmonEVSE (ESP32 WiFi module)SiemensVersiCharge 48A, VersiCharge Blue 80A, VersiCharge IEC go-eCharger Gemini, Gemini flex, Gemini 2.0, Pro, HOMEfix/HOME+ (V3)EtrelINCH Home, INCH Pro, INCH Duo EVBoxElvi, BusinessLine Gen4 (Everon closed 1 Dec 2025)

How to change the OCPP server URL on a Teltonika charger